Chain Link Fence
Galvanized Chain Link FittingsWe have a wide assortment of galvanized chain link fittings including tension bands, brace bands, rails ends and more.
Buy Galvanized Chain Link Fittings
Chain Link Gate HardwareWe carry gate hardware for both residential and commercial projects. We have fork latches, post hinges, gate wheels and more.
Buy Galvanized Chain Link Gate Hardware
Black Chain Link Fence SuppliesAll of our black chain link fittings are powder-coated for lasting beauty. Get your black chain link accessories from us and save some money.
Buy Black Fittings and Gate Hardware
Help for the DIY
Installing a chain link fence may seem overwhelming at first because of all the parts and pieces that are involved. But with a little effort you can install your own chain link fence. The first thing to do is get familiar with all the various items. Take a moment to look over the list below. Then look at a chain link fence in your neighborhood to see how all these different parts fit together.
Fence CalculatorWith our calculator it is easy to determine what you will need for your fencing project. Make a quick sketch of the fence line. Measure and record the distances between each terminal post. Using the calculator select the height of the fence. Enter the quantity of each type of terminal post. (The number of line posts needed will be calculated for you.) Enter the lengths for each fence section. The calculator can handle up to 12 different fence sections.
The example fence below would have: 6 end posts, 4 corner posts, 1 bare post and fence sections of 10, 52, 32, 44, 52, 8, and 4 feet. Do not enter any lengths for the gates. You can also send your sketch to us and we will part out your fence for you.
The accuracy of the calculator is not guaranteed. It is intended only as a tool to help you part out your fence. The items listed cannot be put directly into a shopping cart. The Online Fence Store does not sell or ship any pipe, posts, wire or gates. We encourage you to get those locally and support your local economy. But then save money, and time, by getting the parts and accessories you need shipped directly to you.
Chainlink Fence Calculator
Chainlink Fence Installation InstructionsAll fence posts should be set in concrete or foam. If you are using concrete be certain that the hole depth goes below the frost line for your area. The frost-line can vary from 0" to over five feet deep. If the concrete does not go below this point the post can be shoved up when the frost comes out of the ground in the spring. If you are using structural foam there is no need to go below the frost-line as foam is not affected by the spring thaw like concrete is. In either case be sure that your post is plumb and square. Let the concrete set up for at least three days. The foam will be ready in about an hour.
1. Set the terminal posts at the full height of the fence. Install the caps.
2. Set the line posts 3 inches lower than the terminal posts. Install the eye-tops.
3. Feed the top rail through the eye-tops and connect it to the terminal posts with rail ends and brace bands.
4. Attach the fence fabric to one terminal post with a tension bar and tension bands.
5. Lay the fabric along the fence line.
6. Loosely attach the fabric to the top rail with ties.
7. Stretch the fabric to the next terminal post.
8. Attach the fabric to the post with a tension bar and tension bands.
9. Tie off the fence along the top rail and at the line posts.
10. Using brace bands and hog rings install a ground wire along the bottom if desired.
Free shipping on all orders of $25 or more in the U.S.A.
Monday - Friday: 8:00 AM - 4:30 PM
25 Miranda Drive
Kalispell, Montana 59901